Technical data of pins, keys and rivets

 

>   DIN 1 B (ISO 2339 - NEN 10 B) Taper pin

>   DIN 7 (ISO 2338 - NEN 2281) Parallel pin (dowel pin)

>   DIN 94 (ISO 1234 - NEN 182) Split pin (cotter pin)

>   DIN 258 Taper pin with thread and constant taper length

>   DIN 660 (ISO R 1051) Round head rivet

>   DIN 661 (ISO R 1051) Countersunk head rivet

>   DIN 662 (ISO R 1051) Mushroom head rivet

>   DIN 674 (ISO R 1051) Flat round head rivet

>   DIN 1434 A Clevis pin with small head

>   DIN 1434 B Clevis pin with small head and with split pin hole

>   DIN 1443 (ISO 2340) Clevis pin without head and without (type A) or with (type B) split pin hole

>   DIN 1444 A (ISO 2341 A) Clevis pin with head

>   DIN 1444 B (ISO 2341 B) Clevis pin with head and split pin hole

>   DIN 1469 C Grooved pin, half length grooved with gorge

>   DIN 1470 (ISO 8739 - NEN 2601) Grooved pin, full length parallel grooved with pilot

>   DIN 1471 (ISO 8744 - NEN 2602) Grooved pin, full length taper grooved

>   DIN 1472 (ISO 8745 - NEN 2603) Grooved pin, half length taper grooved

>   DIN 1473 (ISO 8740 - NEN 2604) Grooved pin, full length parallel grooved with chamfer

>   DIN 1474 (ISO 8741 - NEN 2605) Grooved pin, half length reverse grooved

>   DIN 1475 (ISO 8742 - NEN 2606) Grooved pin, third length center grooved

>   DIN 1476 (ISO 8746 - NEN 2460) Round head grooved pin

>   DIN 1477 (ISO 8747) Countersunk head grooved pin

>   DIN 1481 (ISO 8752 - NEN 2458) Spring type straight pin, slotted, heavy type

>   DIN 6325 (ISO 8734 - NEN 2282) Parallel pin (dowel pin), hardened

>   DIN 6880 Key steel, length 1 meter

>   DIN 6885 (ISO R 773 - NEN 2430) Parallel key

>   DIN 6887 (ISO R 774) Taper key with gib head

>   DIN 6888 (ISO 3912) Woodruff key

>   DIN 7337 Blind rivet, countersunk head type

>   DIN 7337 Blind rivet, round head type

>   DIN 7343 (ISO 8750 - NEN 2553) Spiral pin, medium duty

>   DIN 7344 (ISO 8748 - NEN 2554) Spiral pin, heavy duty

>   DIN 7977 (ISO 8737) Taper pin with thread and constant threaded part

>   DIN 7346 (ISO 13337) Spring type straight pin, slotted, slight type

>   DIN 7978 A (ISO 8736 - NEN 2463) Taper pin with internal thread, ground

>   DIN 7979 D (ISO 8735 A - NEN 2464) Parallel pin with internal thread, hardened

>   ~ DIN 11023 Linch pin

>   ~ DIN 11024 Spring cotter for bolt (single coil)

>   ~ DIN 11024 Spring cotter for bolt (double coil)

>   Round head spiral grooved pin (type U)



[ Home | Condições gerais de venda | Newsletter | Consulta/ Encomenda | Informação Técnica | Notícias | Tabela de Preços | Contacte-nos ]